==============================================Router 1===============================================
Router(config)#interface serial 0/0/0
Router(config-if)#description link to Frame Relay Network
Router(config-if)#ip address 10.1.1.1 255.255.255.0
Router(config-if)#frame-relay map ip 10.1.1.2 102 broadcast
Router(config-if)#frame-relay map ip 10.1.1.3 103 broadcast
Router(config-if)#frame-relay lmi-type ansi
Router(config-if)#end
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 10.1.1.0
Router(config-router)#end
============================================ Router 2 ================================================
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface Serial0/0/0
Router(config-if)#ip address 10.1.1.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface serial 0/0/0
Router(config-if)#description Link to Frame Relay
Router(config-if)#ip address 10.1.1.2 255.255.255.0
Router(config-if)#encapsulation frame-relay
Router(config-if)#frame-relay map ip 10.1.1.1 201 broadcast
Router(config-if)#frame-relay lmi-type ansi
Router(config)#exit
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 10.1.1.0
Router(config-router)#default-information originate
Router(config-router)#no auto-summary
Router(config-router)#end
================================================== Router 3 ==========================================
Router(config)#interface serial 0/0/0
Router(config-if)#ip address 10.1.1.3 255.255.255.0
Router(config-if)#encapsulation frame-relay
Router(config-if)#frame-relay map ip 10.1.1.1 301 broadcast
Router(config-if)#frame-relay map ip 10.1.1.2 302 broadcast
Router(config-if)#frame-relay lmi-type ansi
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
Router(config-if)#exit
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 10.1.1.0
Router(config-router)#end
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 10.1.1.0
Router(config-router)#no auto-summary
Router(config-router)#exit
jika ada yang kurang silhakn di tambahkan menurut kreasi anda masing - masing.
Clik disini -- Macam - Macam Routing
0 komentar:
Posting Komentar